• Backseat Electronics Plates .dxf Files (below images are links)
    • We recommend printing on 1/8" inch cast acrylic.
    • Plates used as mounting surface for payload hardware as shown in Vehicle Overview. IMU mount (middle of the first above plate) allows for usage of both newer and older models of IMUs shipped with the Herons.
  • Electrical Connectors
    • Small white connectors on the main boards for FitPC and for optional camera power source
    • WARNING on some Kingfisher units the camera 12v source has reversed polarity - check before connecting!
    • Cable-side connector is Molex Mini-Lock 2-pin connector, part # 51103-0200
    • Connector pins for the housing are female connection terminal MOLEX part # 50351-8100
  • Side lights
    • IP67 red/green lights mounted to each side of the Kingfisher black boxes.
    • Lights come as unit with cable attached. The correct connector must be crimped on to connect with Kingfisher.
    • Manufacturer spec sheet / Ad
    • Link to Amazon page to buy the port/side red lamp
  • Motor Controller
    • The motor controllers in the M300 front seat boxes are the Mamba Monster 2 Link
    • The programmer for these controllers Link



docs (internal)